How to make maple syrup

How to make maple syrup

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

If you are looking for information on how to make maple syrup, you are in the right place: you will find that making maple syrup is easy and fun, and that you will be able to make it yourself in a few simple steps. But which ones?

Maple syrup: a do-it-yourself guide

First, practice a small hole in a maple tree, and then insert a spout from which you can collect the sap which, at that point, will slowly drip from the tree. This sap is slightly sweet, and is made up mostly of water, with a small amount of sugar.

Once the sap has been collected in the desired quantity, you will need to remove some excess water. It is sufficient to boil the sap in a saucepan and, when it comes to a boil, collect the amount of sugar in the liquid, which at that point will evidently appear concentrated.

Once you have removed enough water and cooked the sap to a sugar concentration of 66-68%, you will get a good pure maple syrup!

Read also How to make rose syrup

What you need to make maple syrup

Of course, the only thing you need to be able to make maple syrup is to be lucky enough to live in an area where you can collect maple syrup! So take a look at your area, to find out if on your property, or on properties you can legally use, there are maples.

In addition to that, you will need a small perforator to make holes in the bark, some spouts and several buckets. Of course, you'll also need a frying pan or pot, and a stove or propane burner.

How to spot a good maple

There are different types of maple trees in the world, but the two main types from which it is possible to produce Maple syrup they are sugar maple and red maple.

In particular, the sugar maples they usually grow at higher elevations, while red maples grow at lower elevations. Both are easily identifiable in the summer, when they have their typical leaves, but in winter it is necessary to use the bark to identify them without error.

In general, the sugar maple is the preferred tree for making maple syrup, because it has a higher percentage of sugar in its sap (2-3%), and therefore does not need as much liquid. to obtain an excellent syrup. You will recognize a maple tree by its smooth, gray bark, but in the case of sugar maple, the bark can become very rough and cracked, and even evolve to a darker gray as the years go by.

And what about the red maple?

Some might tell you that maple syrup made with red maple is not as good as that made with sugar maple, but it's not exactly true. It is true that the sugar content of a red maple will be 1-2%, and therefore you will need more maple sap, but if your goal is to make syrup for self-consumption, and you do not have commercial resale purpose, you don't need to worry!

To correctly identify red maple, look for trees with hard wood, with smooth and gray bark (but darker than sugar maple). With the aging of the tree, the bark can begin to peel and appear as real leaves that come off, to fall off the tree.

How to collect the syrup

Once you've made the holes in the bark, you should check your trees once a day (or more if you can) to see if the sap is leaking regularly.

There is no predefined pouring rhythm. Sometimes this is a slow drip, while sometimes it will be a fast drip. It all depends on the weather and the season. Once you get some maple sap in your containers, you can proceed with the next step.

Keep in mind, however, that the maple sap it is very perishable. If the weather is hot, you will have to collect your sap at least once a day and boil it immediately, before it loses its qualities! So remember that the longer your sap stays out of the tree before it is processed, the greater the chances of producing maple syrup with a loving and unpleasant flavor.

Once the sap has been collected, introduce it into the boiling process that we commented above, boiling the sap until a sufficient amount of water is removed, and you will be left with pure maple syrup only. Be careful: this process generates a lot of steam, and therefore it might be worth doing it outside, if possible, because your kitchen can quickly fill with steam!

Video: How to Make Maple Syrup and the science of maple sap (May 2022).